Buttero Leather Strap for Mido Ocean Star Tribute

The Mido Ocean Star Tribute is a dive-styled watch that ships on steel or rubber, which is exactly the look this owner wanted to move away from. The request was for something warmer and a touch dressier that still held up to daily wear on a larger wrist. The answer was a chestnut Buttero leather strap, cut to an 8-inch fit and built to sit against a tool-watch case without looking out of place.

Strap specifications

Why these choices

Buttero is a dense vegetable-tanned leather from the Walpier tannery in Tuscany. It starts firm and structured, which suits the heft of a dive case, and it takes on a hand-rubbed patina as it is worn. In chestnut, that means the color deepens over months of wear, so the strap grows into the watch rather than staying flat and new-looking. It is a different intent from an exotic skin — this is a leather chosen to age.

The 80/130 mm length gives an 8-inch wrist room to breathe, with the buckle landing near the center holes. An 18 mm stainless buckle keeps the taper proportional to the case, and regular spring bars let the strap be removed with a standard tool. Buttero's structure means it will not collapse or fold awkwardly under the weight of a steel diver.

The same veg-tan approach carries across the rest of our Buttero leather collection and our wider range of brown leather straps, all cut to measure through the custom strap configurator.

FAQ

Is a Buttero leather strap a good match for the Mido Ocean Star Tribute?
It is. Buttero's firm structure suits the weight of a dive case, and the chestnut tone warms up a steel-and-black watch. Order it to your lug width and wrist size for a flush fit.

What length works for an 8-inch wrist?
An 80/130 mm strap gives about 210 mm of usable length, which lands comfortably in the middle holes on an 8-inch wrist.

Every strap is made to order and built to your measurements. Allow about 2–3 weeks from order to delivery. You can begin with the chestnut Buttero strap.